Special epoxy anti-corrosion and waterproof paint
Product attachments:
I. Product Introduction
Special anti-corrosion and waterproof paint is a high-performance paint that combines the excellent adhesion and anti-corrosion and waterproof functions of special resins. Its main features are excellent durability, chemical corrosion resistance, and excellent waterproof performance. This paint is widely used in the surface of various substrates that require anti-corrosion and waterproof treatment, such as buildings, bridges, pipelines, storage tanks, etc., which plays an important role in protecting the substrate and prolonging its service life.
The main raw materials of special anti-corrosion and waterproof paint include special resins, curing agents, pigments, fillers, additives, etc. Among them, special resin is the matrix of the paint, which is responsible for forming a tough coating; the curing agent reacts chemically with the special resin to make the paint solidify into a film on the surface of the substrate. Pigments and fillers are responsible for providing the color of the coating and enhancing the mechanical properties of the coating. Additives play the role of adjusting the performance of the paint and improving the construction performance.
II. Product Features
Corrosion resistance: The special anti-corrosion and waterproof paint has excellent corrosion resistance, can resist the erosion of various chemical substances such as acids, alkalis, and salts, and protect the substrate from corrosion damage.
Impermeability: The coating formed by the paint is dense and non-porous, has good impermeability, and can effectively prevent moisture and other liquids from penetrating into the interior of the substrate through the coating, thereby playing a waterproof role.
Durability: The coating formed by special anti-corrosion and waterproof paint is wear-resistant, impact-resistant, and aging-resistant, and has a long service life. It can maintain stable performance for a long time in harsh environments.
The coating is hard, tough, water-resistant, wear-resistant, and resistant to chemical media erosion. It has excellent anti-corrosion performance and is the best internal anti-corrosion material. It can be applied by heating or at room temperature, cured at room temperature, and the construction method is simple and easy.
III. Scope of application
1. Because the coating is hard and has a low friction coefficient, it is suitable for internal coating of steel pipes, cast iron pipes, and concrete pipes, which can reduce friction and increase throughput.
2. Due to its good wear resistance, it is suitable for the inner wall coating of pipelines containing solid particles of mineral slurry, sewage, rainwater, and river water, which can prolong the service life of the pipeline.
3. It has high mechanical strength and large bonding force, and is suitable for internal and external anti-corrosion of steel storage tanks, concrete, cooling towers, sewage plants, wharfs and other equipment.
IV. Construction Instructions
1. Mixing ratio: A paint ∶ hardener = 5 ∶ 1 (weight ratio).
2. Construction method: Spraying or brushing (a small amount of solvent can be added).
3. Shelf life after mixing: The shelf life is shortened as the temperature of the paint increases.
Note: If you need more detailed information, please ask our company for the construction operation manual.
V. Technical Indicators
|
Inspection Result |
|||||
|
Item |
Technical index |
Inspection result |
Measured |
Test method (National Standard) |
|
|
Product color |
Meet the sample |
Standard symbol |
Gray |
Visual inspection |
|
|
Paint film appearance (visual) |
Smooth and free of impurities |
Standard symbol |
Smooth |
CB1721-79 |
|
|
Gloss |
Matt |
Meet |
28° (60° angle) |
GB1743-79 |
|
|
Solid content: % |
85 |
Standard symbol |
82 |
GB/T1725-2007 |
|
|
Fineness μm |
≤30 |
Standard symbol |
25 |
|
|
|
Hardness: h |
≥2 |
Standard symbol |
2 |
GB/T6739-2006 |
|
|
Drying time |
Surface dry (min) |
≤20 |
Standard symbol |
1 |
GB/T1728-1989 |
|
Hard dry (h) |
≤24 |
Standard symbol |
24 |
GB/T1728-1989 |
|
|
Flexural resistance (mm) |
2 |
Standard symbol |
2 |
GB/T1731-1993 |
|
|
Impact strength (cm) |
50 |
Standard symbol |
50 |
GB/T1732-93 |
|
|
Adhesion: (level) |
1 |
Standard symbol |
1 |
GB1720-79 |
|
|
Salt spray resistance: h |
≥500 hours |
Standard symbol |
No blistering, no rust, no peeling |
GB/T1771-2007
|
|
VI. Precautions
1. Use the special anti-corrosion and waterproof topcoat, thinner, special putty and special repair material supplied by our company.
2. The iron bucket should be placed upright during storage or transportation, away from fire sources, and avoid exposure to sunlight.
3. Store in a cool, dry, ventilated warehouse with no fire source nearby. The shelf life in the original container is one year.
Youyang Chemical is committed to working together with all partners to achieve shared success. We understand that every collaboration presents both new opportunities and challenges. Youyang Chemical boasts not only advanced production technology but also a dedicated team committed to R&D and innovation, constantly striving for breakthroughs and excellence. Our products, quality, and service are designed to open a new chapter in your beautiful life. We firmly believe that through our joint efforts, we will create greater value and achieve a win-win situation. Youyang Chemical looks forward to collaborating with you to jointly chart a grand blueprint for the future. Let us work together to create a better tomorrow!
Product Inquiry
Contact our team in time and we will be happy to help you.
Committed to providing customers with high-quality coating products and services
Contact us
Address: No. 10, Baishitou Industrial Zone, Yueshan Town, Kaiping City, Jiangmen City, Guangdong, China
Hello, what can we do for you?
*Note: Please be sure to fill in the information accurately, we will contact you as soon as possible
Scan
Learn more about company information!